| Features <BR> The equipment adopts the co-current drying process, which is especially suitable for the fast drying of high-humidity materials that need to be preserved. . The drum of the machine is equipped with a high-speed rotating crushing device. For example, the contact area between the material and the drying medium is large, and some unique designs inside the equipment make the material difficult to adhere to the copy board and the cylinder wall. The whole machine is moisturized and sealed. Good performance, thermal efficiency is much higher than general drum dryer. |
The compact structure of the machine makes it easy to install and debug and has a small footprint. Both the roller and the crushing device are adjusted steplessly, which can adapt to the drying of different materials. The machine can be used with heat sources using different fuels (such as coal, heavy oil, natural gas, etc.).
| Application range <BR> High-humidity material dryer is a kind of drying equipment with low fuel consumption and high efficiency. This machine can dry high-humidity materials with an initial moisture content of less than 85% to a final moisture content of less than 13% at one time. It is suitable for livestock and poultry raising, food brewing, sugar making, pharmaceutical and other industries to treat various high-humidity wastes, scraps and more A variety of chemical raw materials, such as chicken manure, alcohol tank, wine tank, medicine residue, fructose residue, sauce residue, beet residue, animal slaughter contents, slime, penton soil, etc., are used for resource development and environmental protection More ideal equipment. |
| 1. Equipment composition This complete set of equipment is mainly composed of a roller crusher dryer, a combustion furnace, a feeding spiral, a discharging spiral, a conveying pipe, a dust collector, a wind shutoff device, an induced draft fan, a control cabinet, and the like. |
2.Working principle The high-humidity material is directly sent to the drum crusher and dryer by the feeding screw. It is repeatedly picked up and scattered by the copyboard on the inner wall of the drum. After the crushing device breaks down, the material is in full contact with the high-humidity medium under negative pressure , Complete heat and mass transfer process. Due to the inclination of the drum and the effect of diverting the wind, the material moves slowly from the feeding end, and is discharged by the discharge spiral after drying. The tail gas is removed by the dust collector and discharged into the atmosphere.